AI Flare Stack Monitoring in the UAE
Quick answer: A flare needs someone watching it every hour of the day. AI video analytics on a fixed thermal or gas camera does that watching: it learns what a normal flare looks like, then alarms when the pilot goes out, the flame turns smoky or unstable, or gas appears around the tip. Operators get a warning and a recorded image instead of finding out from a phone call or a regulator. TI Thermal Imaging LLC specifies, supplies and supports these systems for oil, gas and petrochemical sites in the UAE, and is not tied to one manufacturer.
What AI adds to a fixed flare camera
- Pilot and flame detection. The software recognises a lit flare in the thermal image and alarms when the flame or pilot is lost.
- Combustion quality. It picks out smoke, flame shape and flame instability that a person on a monitor can miss on a long shift.
- Unburnt gas. On a gas imaging camera, it can flag gas appearing around the flare tip or header lines.
- Fewer false alarms. It is trained to tell the flare from sun glint, steam, birds and passing vehicles, so the control room is not alarmed all day by nothing.
- Trends and records. Every event is logged with image and time, so you can show what happened and look for patterns over weeks and months.
How the alarm reaches you
Alarms can go to your control room, a local sounder or beacon, and phones or email, and into plant systems where the site allows it. Each alarm carries the image, so the person receiving it sees what the software saw.
How a project runs
- Review the flare, the hazard, the permits and the hazardous-area requirements.
- Choose the camera and software to suit the flare, the distance and the question you need answered.
- Install and commission to your permit and safety rules.
- Train the system on your flare, then tune alarm levels over the first weeks of running.
- Support and review, including a look at alarm history after a season.
Honest limits
- AI analytics support operators. They do not replace your flare management, safety systems or regulatory monitoring.
- Camera range, weather and heat haze affect what can be seen. We check the views on site before anything is fixed.
- Alarm settings need tuning on a live flare. We plan time for it.
- Where emissions figures are needed for reporting, the method has to be agreed with the regulator and the operator. We say so up front.
Fixed monitoring or survey campaigns
Some flares need a camera on them all the time. Others need a planned survey to prove condition. See our flare stack monitoring, fixed gas camera and automation solutions and AI gas leak detection pages.
Why Ti
- Around ten years supplying thermographic solutions to the oil and gas industry.
- We have been involved in developing OGI for one of our leading oil and gas clients, including supplying the equipment and training a significant number of their technical engineers.
- Our lead operative is at advanced instructor level and can train and certify OGI technicians.
- We choose the system around your flare, not around a catalogue.
Questions we get asked
Does the AI work at night?
Yes. A thermal camera sees a flare in the dark as well as in daylight.
Can it add to our existing cameras?
Sometimes. We check what you have, what it can see and whether the analytics can run on it.
Can it connect to our control room?
Usually, where the site allows it. We agree the route at scoping.
Do you repair flares?
No. We monitor, inspect and report.
Talk to our team
Tell us what you flare, where, and what you need to prove or prevent. Call +971 4 560 7296, email sales@thermalimaging.ae or use the contact form.